Central vacuum sales and service

We service all central vacuum brands

Beam, VACUFLO, MD, and older central vacuum systems are welcome. Call with the brand, model, and problem, or compare your unit with the photos below.

Call about your brand See systems we service

All-brand central vacuum serviceAuthorized VACUFLO and MD dealerOlder systems welcome

Close view of a central vacuum hose connecting to a discreet wall inlet

BrandLook for the name on the power unit

ModelKeep the complete label information

SymptomTell us what changed

PartsAvailability depends on the model

Sales and service

Brands sold and serviced

Vac Shack services all central vacuum brands, including older and discontinued systems. We are an authorized VACUFLO and MD dealer and sell and install both brands. Our shop is in Festus, with central vacuum house calls across the St. Louis area.

Beam

We service older and newer Beam systems and stock most common repair parts.

Beam repair and service

NuTone

Many NuTone parts are no longer available. We can often get older systems running again with minor repairs.

Filtex

We service and upgrade older Filtex systems.

VACUFLO

We are an authorized VACUFLO dealer. Call us for service, parts, or a replacement system.

VACUFLO sales and service

MD Modern Day and Silentmaster

We are an authorized MD dealer. We sell, install, and service MD systems and carry replacement bags, filters, parts, and accessories.

Black & Decker

We service and modernize older Black & Decker systems. Repair parts are limited.

Sears and Kenmore

We service and modernize Sears and Kenmore systems. Some original hoses and inlet valves are no longer available.

More brands we service

Vacumaid, AstroVac, Airvac, Fasco, Hoover, Eureka, Whirlpool, Electrolux, Honeywell, OVO, and Cyclovac.

These are examples of our all-brand central vacuum service. Call even if your brand is not listed.

Browse equipment information from VACUFLO.

Central vacuum systems we service

Recognize the unit in your home?

Compare your canister with these photos from our work. We service all central vacuum brands, including systems you don’t see here. Open any photo for a closer look.

Beam Serenity Plus central-vacuum power unit — Beam Serenity Plus

VACUFLO central-vacuum unit mounted on a wood panel — VACUFLO

Cream Beam central-vacuum power unit — Beam

Blue Filtex central-vacuum unit with two external motors — Filtex

Red NuTone central-vacuum power unit — NuTone

Black & Decker central-vacuum power unit — Black & Decker

Yellow Kenmore built-in vacuum power unit — Kenmore

Red Eureka central-vacuum power unit — Eureka

Riccar central-vacuum unit beside exposed framing — Riccar

CentraLUX central-vacuum unit in a utility storage area — CentraLUX

OVO central-vacuum unit with white piping — OVO

VacuMaid installation with multiple red canisters — VacuMaid

White MD central-vacuum unit on unfinished drywall — MD

MD Flo-Master central-vacuum unit with stored hose — MD Flo-Master

White MD central-vacuum unit beside stored hoses — MD

Element central-vacuum unit on unfinished drywall — Element

VACUFLO central-vacuum unit above a boxed garage accessory kit — VACUFLO

VACUFLO central-vacuum unit beside a utility inlet — VACUFLO

Can’t find a match? Contact Vac Shack with a description of the unit and what it’s doing. A brand or model number helps if you can find one.

More of our work

Inlets, hoses, and piping

Central vacuum service includes the connections throughout your home. These photos show wall inlets, hose work, and pipe routes through ceilings and closets.

Central-vacuum piping routed through an unfinished ceiling — Ceiling pipe route

Central-vacuum pipe elbows between ceiling joists — Pipe elbows

Hose connected to a low-wall central-vacuum inlet — Hose connection

Closed central-vacuum inlet beside a baseboard — Wall inlet

Beige central-vacuum wall inlet beside an electrical outlet — Older inlet

Taped-over central-vacuum inlet opening — Inlet opening

Disassembled vacuum hose beside hand tools — Hose repair

Central-vacuum piping routed through closet shelves — Closet pipe route

Central-vacuum pipe elbow entering the closet ceiling — Closet pipe elbow

Central-vacuum pipe elbow beside ductwork — Piping beside ductwork

Central-vacuum inlet rough-in between wall studs — Inlet rough-in

Central-vacuum piping running between ceiling joists — Piping between joists

Central-vacuum inlet and piping in exposed framing — Inlet and piping

For weak suction, a damaged inlet, or a system that won’t start, ask about central vacuum repair and service.

Good to know

Can you service a central vacuum brand you did not install?

Vac Shack services all central vacuum brands, including older and discontinued systems. Beam, VACUFLO, MD, NuTone, and Kenmore are examples of the equipment we work on. Repair depends on the fault, condition, and parts availability. We sell and install VACUFLO and MD systems from our Festus shop.

Last updated October 8, 2026

Identify your unit

A label and a description help us get started

If the label is missing, compare your unit with our equipment photos or call and describe it.

Find the model label

Photograph or write down the brand and complete model number on the power unit.

Describe the problem

Mention weak suction, unusual noise, a damaged hose or inlet, or a unit that will not start.

Discuss the service

We can talk through a house call, parts, or replacement options for your system.

See central vacuum equipment photos

Older teal central vacuum power unit mounted on a wall — An older central vacuum power unit.

Older equipment

The model is the starting point

A label helps us find parts, but suction and operation also depend on the hose, inlets, controls, and tubing throughout your home.

We check those components before recommending work. Some original parts for discontinued models are unavailable; a compatible repair or replacement may still be possible.

Power-unit model and collection type
Inlet seals and controls
Hose condition and airflow
Tubing leaks and blockages
Replacement-part compatibility

Central vacuum repair

Questions about your brand

What if I don’t see my brand listed?

We service all central vacuum brands. Call with the name and model on your power unit. If the label is missing, describe the unit and the problem.

Can you repair a discontinued brand?

We work on older and discontinued central vacuum systems. Repair depends on condition, compatibility, and parts availability. Some systems can be repaired; others may need a replacement component.

Which central vacuum brands do you sell?

We are an authorized VACUFLO and MD dealer. We sell and install those systems and service all central vacuum brands, including Beam.

All central vacuum brands

Ask us about your system

Call with the brand, model, and what the vacuum is doing. We can also help identify an older unit.

Call (636) 535-2359Mon-Fri 9:30-5 · Sat 9:30-3